Beko WX742430 User Manual - Page 42
product yourself.
View all Beko WX742430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Problem Reason Solution Detergent residue in the detergent drawer. (**) Detergent is put in wet drawer. • Dry the detergent drawer before putting in detergent. Detergent has gotten damp. • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. Water pressure is low. • Check the water pressure. The detergent in the main wash compartment got • Check the holes and clean if they are wet while taking in the prewash water. Holes of clogged. the detergent compartment are blocked. There is a problem with the detergent drawer valves. • Call the Authorized Service Agent. Detergent might be mixed with the softener. • Do not mix the softener with detergent. Wash and clean the dispenser with hot water. Regular drum cleaning is not applied. • Clean the drum regularly. For this, please see 4.7.2. Too much foam forms in the Improper detergents for the washing machine are • Use detergents appropriate for the machine. (**) being used. washing machine. Excessive amount of detergent is used. • Use only sufficient amount of detergent. Detergent was stored under improper conditions. • Store detergent in a closed and dry location. Do not store in excessively hot places. Some meshed laundry such as tulle may foam too • Use smaller amounts of detergent for much because of their texture. this type of item. Detergent is put in the wrong compartment. • Put the detergent in the correct compartment. Softener is being taken early. • There may be problem in the valves or in the detergent dispenser. Call the Authorized Service Agent. Foam is overflowing from Too much detergent is used. the detergent drawer. • Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. • Put detergent into the machine suitable for the programmes and maximum loads indicated in the "Programme and consumption table". When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent. Laundry remains wet at the Excessive foam might have occurred and • Use recommended amount of end of the programme. (*) automatic foam absorption system might have detergent. been activated due to too much detergent usage. (*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun. (**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2 A CAUTION: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself. 42 / EN Washing Machine / User's Manual