Beko WY114764M User Manual - Page 58

EN / 58

Page 58 highlights

Problem Cause Solution Detergent residue in the detergent drawer. (**) Detergent was put in wet drawer. Detergent has gotten damp. • Dry the detergent drawer before putting in detergent. • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. Water pressure is low. • Check the water pressure. The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked. • Check the holes and clean if they are clogged. There is a problem with the detergent drawer valves. • Call the Authorised Service Agent. Detergent was mixed with the • Do not mix the softener with detergent. softener. Wash and clean the drawer with hot water. Regular drum cleaning is not • Clean the drum regularly. applied. Too much foam forms inside the product. (**) Improper detergents for the washing machine is used. Excessive amount of detergent is used. • Use detergents appropriate for the washing machine. • Use only sufficient amount of detergent. Detergent was stored under improper conditions. • Store detergent in a closed and dry location. Do not store in excessively hot places. Some meshed laundry such as tulle may foam too much because of their texture. • Use smaller amounts of detergent for this type of item. Detergent was put in the wrong compartment. • Put the detergent in the correct compartment. Softener is being taken early by the product. • There may be problem in the valves or in the detergent drawer. Call the Authorised Service Agent. Foam is overflowing Too much detergent is used. from the detergent drawer. • Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. • Put detergent into the product suitable for the programmes and maximum loads indicated in the "Programme and consumption table". When you use additional chemicals (stain removers, bleaches and etc), reduce the amount of detergent. Laundry remains wet at the end of the programme. (*) Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. • Use recommended amount of detergent. EN / 58 Washing Machine / User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

EN / 58
Washing Machine / User’s Manual
Problem
Cause
SolutIon
Detergent residue
in the detergent
drawer. (**)
Detergent was put in wet
drawer.
Dry the detergent drawer before putting
in detergent.
Detergent has gotten damp.
Keep detergents closed in an
environment free of humidity and do not
expose them to excessive temperatures.
Water pressure is low.
Check the water pressure.
The detergent in the main
wash compartment got wet
while taking in the prewash
water. Holes of the detergent
compartment are blocked.
Check the holes and clean if they are
clogged.
There is a problem with the
detergent drawer valves.
Call the Authorised Service Agent.
Detergent was mixed with the
softener.
Do not mix the softener with detergent.
Wash and clean the drawer with hot
water.
Regular drum cleaning is not
applied.
Clean the drum regularly.
Too much foam
forms inside the
product. (**)
Improper detergents for the
washing machine is used.
Use detergents appropriate for the
washing machine.
Excessive amount of
detergent is used.
Use only sufficient amount of detergent.
Detergent was stored under
improper conditions.
Store detergent in a closed and dry
location. Do not store in excessively hot
places.
Some meshed laundry such
as tulle may foam too much
because of their texture.
Use smaller amounts of detergent for
this type of item.
Detergent was put in the
wrong compartment.
Put the detergent in the correct
compartment.
Softener is being taken early
by the product.
There may be problem in the valves or in
the detergent drawer. Call the Authorised
Service Agent.
Foam is overflowing
from the detergent
drawer.
Too much detergent is used.
Mix 1 tablespoonful softener and ½
l water and pour into the main wash
compartment of the detergent drawer.
Put detergent into the product suitable
for the programmes and maximum
loads indicated in the “Programme and
consumption table”. When you use
additional chemicals (stain removers,
bleaches and etc), reduce the amount of
detergent.
Laundry remains
wet at the end of
the programme. (*)
Excessive foam has occurred
and automatic foam
absorption system has been
activated due to too much
detergent usage.
Use recommended amount of detergent.