Beko WY86042 Owners Manual - Page 33

Problem Washing takes longer than specified in the user manual.(*) Programme time does not countdown. (On models with display) (*) Programme time does not countdown. (*) Product does not switch to spinning step. (*) Washing performance is poor: Laundry turns gray. (**) Cause Solution Water pressure is low. Voltage is low. Input temperature of water is low. Number of rinses and/or amount of rinse water have increased. Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. Timer may stop during water intake. Timer may stop during heating step. • Product waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends. • Washing time is prolonged to avoid poor washing results when the supply voltage is low. • Required time to heat up the water extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results. • Product increases the amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary. • Use recommended amount of detergent. • Timer indicator will not countdown until the product takes in adequate amount of water. The product will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this. • Timer indicator will not countdown until the product reaches the selected temperature. Timer may stop during spinning step. • Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product. There is unbalanced load in the product. • Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product. There is unbalanced load in the product. • Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product. The product will not spin if water is not drained completely. • Check the filter and the draining hose. Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. • Use recommended amount of detergent. Insufficient amount of detergent has been used over a • Use the recommended amount of detergent long period of time. appropriate for water hardness and the laundry. Washing has been made at low temperatures for a • Select the proper temperature for the laundry to long time. be washed. Insufficient amount of detergent is used with hard water. • Using insufficient amount of detergent with hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate graying once it happens. Use the recommended amount of detergent appropriate for water hardness and the laundry. Excessive amount of detergent is used. • Use the recommended amount of detergent appropriate for water hardness and the laundry. Washing Machine / User's Manual 33 / EN