Belkin F1D074 F1D074 User Manual - Page 8

6. Connect a computer to the OnniView". Attach the female end of the VGA cable into the computer's HD-DB 15 port, and the female end into a HD-DB-15 port on the Omniview". * Attach the keyboard cable (either PS/2 or AT-style) into the keyboard port of the computer. Plug in the opposite end into the appropriate port on the OnuiView'. * Attach the mouse cable into the mouse port of the computer and into the OmniView', as below. If the computer is using a serial mouse, connect the made end of the cable into a DB-9 serial port on the computer, and plug in the female end into the serial mouse port on the OmniView'. DO NOT use combo mouse adapters on the mouse cable, as doing so would not work and may cause data corruption when the computers are running. This is because PS/2 and serial mouse signals are completely different and incompatible with each other. * Double check all the cabling and make sure that all the cables are securely inserted and screwed in where possible. Power up the OmniView", then you are ready to boot up all the connected computers!