Belkin F1DA108T User Manual - Page 11
Step-by-Step Installation Guide, Installing the PRO2 into a Server Rack - user manual
View all Belkin F1DA108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
INSTALLATION Step-by-Step Installation Guide Cautions and Warnings: Before attempting to connect anything to the PRO2 or your computer(s), please ensure that everything is powered off. Plugging and unplugging cables while computer(s) are powered on may cause irreversible damage to the computer(s) and/or the PRO2(s). Belkin Components is not responsible for damage caused in this way. Installing the PRO2 into a Server Rack: Bracket Installation (F1DA108T and F1DA116T only) Eight- or 16-Port PRO2s include adjustable mounting brackets ideal for installation in 19-inch racks. The mounting brackets feature three adjustment positions to allow the faceplate of the PRO2 to mount flush to your rack-mounted servers, or to the rack. Please follow these simple steps to achieve the desired adjustment. The 4-Port PRO2 requires an optional mounting kit (F1D005). 1. Remove the adjustable brackets from the box. (The adjustable brackets allow you to set the PRO2's face flush with the ends of the rails or to extend the PRO2 past the front of the rails). 2. Determine how far you would like the PRO2 to protrude from the rack. Select a bracket-hole scheme. 3. Attach the bracket to the side of your PRO2 using the Phillips screws provided. (Refer to diagram above). 4. Mount the PRO2 to the rack rail assembly. Note: If this PRO2 will be daisy-chained to another PRO2, set the BANK address prior to installing on a rack. Refer to the section in this user manual labeled "Connecting Multiple PRO2s (Daisy-Chaining)". 9