Belkin F1DC101C-US User Guide - Page 6
Connecting the KVM, Switch or Server
 |
View all Belkin F1DC101C-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Connecting the KVM Switch or Server Step 1 Make sure your KVM switch or server is powered OFF. Step 2 Using the included PS/2 KVM Cable Kit, connect one set of VGA and PS/2 connectors to the back of the Console. (Refer to diagrams below.) Step 3 Connect the other end of the Cable Kit to the console monitor, keyboard, and mouse ports on your KVM switch or server. (Refer to diagrams below.) Step 4 Power ON the Console. Step 5 Power ON the KVM switch or server connected to the Console. Step 2 Connecting to a KVM switch Console 6'! Step 3 Connecting to a server Console 6'! JcXm\@eglk DXjk\i@eglk&JcXm\Flkglk KVM Switch Server Connecting the KVM Switch or Server 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
 |
 |
Connecting the KVM Switch or Server
6
Connecting the KVM
Switch or Server
Step 1
Make sure your KVM switch or server is powered OFF.
Step 2
Using the included PS/2 KVM Cable Kit, connect one set of VGA and PS/2
connectors to the back of the Console. (Refer to diagrams below.)
Step 3
Connect the other end of the Cable Kit to the console monitor, keyboard,
and mouse ports on your KVM switch or server. (Refer to diagrams below.)
Step 4
Power ON the Console.
Step 5
Power ON the KVM switch or server connected to the Console.
Step 2
Connecting to a KVM switch
Step 3
Connecting to a server
Console
KVM Switch
Console
Server