Belkin F1DC116B-SR User Manual - Page 34
Troubleshooting
![]() |
View all Belkin F1DC116B-SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Troubleshooting My server does not boot up when connected to the LCD Rack Console, but works fine when I connect the keyboard, video, and mouse directly to the server. • Make sure that the keyboard and mouse cables are connected tightly between the LCD Rack Console and the server. • Check that the keyboard and mouse cables are not crossed. • Check the cable connections. I am getting ghosting, shadowing, or fuzzy images on my monitor. • Check that all video cables are inserted properly to the Cable Kit. • Check that the monitor supports the resolution and refresh-rate setting on your server. • Lower the video resolution of the monitor. • Check that the cable length does not exceed 25 feet. • Check that the graphics card you are using supports the resolution and refresh-rate setting on your server. I am getting a black screen on my monitor. • Check that all video cables are inserted properly. • Check that the keyboard cable is connected and inserted properly between the server the appropriate port on the LCD Rack Console. • Move the mouse and see if it is necessary to log in as a user. The server does not detect a keyboard and I get a keyboard error reported at boot up. • Check that the cable kit on the LCD Rack Console is completely connected to your server. Tighten any loose connections. • Check whether USB-keyboard legacy support is enabled in the system BIOS. • If you are using the keyboard software that was included with your keyboard, uninstall it and then reinstall the standard Microsoft keyboard driver. • Try booting the problem computer while the port is selected and wait until the operating system loads before switching away to another computer. 32
![](/manual_guide/products/belkin-f1dc108bsr-user-manual-d7cc732/34.png)