Belkin F1DP116A User Manual - Page 24
Connecting Servers to the SMB CAT5 KVM Switch, Sun Server with MiniDIN8 Connection
View all Belkin F1DP116A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
section Installation Connecting Servers to the SMB CAT5 KVM Switch 1 (Sun Server with MiniDIN8 Connection): 2 Step 1 Make sure your server is powered off. 3 Step 2 Using the Belkin OmniView SMB Server Interface Module for Legacy Sun 4 (F1DP101AeaAL), connect the VGA connector to the monitor port on your server. (Refer to diagram below.) 5 6 7 8 Step 3 Connect the miniDIN8 connector to the miniDIN8 keyboard port on the server. (Refer to diagram below.) 21
21
1
2
3
4
5
6
7
8
section
Installation
Connecting Servers to the SMB CAT5 KVM Switch
(Sun Server with MiniDIN8 Connection):
Step 1
Make sure your server is powered off.
Step 2
Using the Belkin OmniView SMB Server Interface Module for Legacy Sun
(F1DP101AeaAL), connect the VGA connector to the monitor port on your
server. (Refer to diagram below.)
Step 3
Connect the miniDIN8 connector to the miniDIN8 keyboard port on the
server. (Refer to diagram below.)