Belkin F5D5005 F5D5005 Manual - Page 1

Belkin F5D5005 Manual

Get Belkin F5D5005 PDF manuals and user guides View all Belkin F5D5005 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Make sure you have the following: Installation Software CD Gigabit Desktop Network PCI Card Ethernet Cable (not included) System Requirements PC-compatible desktop computer with one available PCI slot and a CD-ROM drive. Windows® 98SE, 2000, Me, XP Quick Setup 1. Install Important Note: Install the software before inserting the Card. 1.1 Insert the CD into your CD-ROM drive. 1.2 The Belkin Setup Utility screen will automatically appear. 1.3 In the "Menu" window, drag your mouse over the "Install" button, then click on the words "Click here" located to the right side of the "Install" button to start the software installation program. (click) Click here Make sure you have the following 1 NOTE: If the Setup Utility screen does not appear within 20 seconds, open up your CD-ROM drive by double-clicking on the "My Computer" icon. Then, double-click on the folder named "Files". Next, double-click on the icon named "Setup.exe". Install 2 1.4 The installer will now start. 1.5 After the installation is complete, click "Yes" to shut down your computer. (click) Yes 2. Connect Insert the Card into the Computer 2.1 Remove the screws behind your computer case that secure the computer cover and remove cover. WARNING: Be sure to power off your computer and disconnect your power cord before opening up your computer. 2.2 Touch any metal part of the case to discharge static electricity, which could damage your product or your computer. 2.3 Locate an empty PCI expansion slot. It is usually white in color. 2.4 Confirm that the Card will fit into the slot you have chosen. Install 3 Connect 4 2.5 Remove the metal port cover from the back of the computer that corresponds to the PCI slot you selected. If there is a screw, place it in a safe place, as you will be using it to attach the Card to the computer later. 2.6 Push the Card firmly into the PCI slot that you have chosen. Apply pressure as needed until the connector is fully seated. 2.7 Now secure the Card with the screw that you previously placed in a safe place. 2.8 Replace the computer's cover. Now that the Card is installed, you can reconnect the power cord, and turn it back on. Connect 5

  • 1
  • 2
Important Note: Install the software before inserting
the Card.
2.
Connect
Insert the Card into the Computer
NOTE:
If the Setup Utility screen does not appear
within 20 seconds, open up your CD-ROM
drive by double-clicking on the “My Computer”
icon. Then, double-click on the folder named
“Files”. Next, double-click on the icon
named “Setup.exe”.
Make sure you have
the following:
Gigabit Desktop
Network PCI Card
Installation
Software CD
System Requirements
PC-compatible desktop computer with one available PCI slot and a
CD-ROM drive. Windows
®
98SE, 2000, Me, XP
Quick Setup
Make sure you have the following
1
1.
Install
1.1
Insert the CD into your CD-ROM drive.
1.2
The Belkin Setup Utility screen will
automatically appear.
1.3
In the “Menu” window, drag your mouse
over the “Install” button, then click on the
words “Click here” located to the right side
of the “Install” button to start the software
installation program.
2.1
Remove the screws behind your computer
case that secure the computer cover and
remove cover.
WARNING:
Be sure to power off your computer
and disconnect your power cord before opening
up your computer.
2.2
Touch any metal part of the case to
discharge static electricity, which could
damage your product or your computer.
2.3
Locate an empty PCI expansion slot. It is
usually white in color.
2.4
Confirm that the Card will fit into the slot
you have chosen.
Connect
4
Install
3
Install
2
1.4
The installer will now start.
1.5
After the installation is complete, click
“Yes” to shut down your computer.
2.5
Remove the metal port cover from
the back of the computer that
corresponds to the PCI slot you
selected. If there is a screw, place
it in a safe place, as you will be
using it to attach the Card to the
computer later.
2.6
Push the Card firmly into the
PCI slot that you have chosen.
Apply pressure as needed until
the connector is fully seated.
2.7
Now secure the Card with
the screw that you previously
placed in a safe place.
2.8
Replace the computer’s cover. Now
that the Card is installed, you can
reconnect the power cord, and turn it
back on.
Connect
5
Click here
(click)
Yes
(click)
Ethernet Cable
(not included)