Belkin F5D7230-4 Quick Installation Guide - Page 3

3 Connect the Router to your Modem and Computer contd. 5. Turn on your cable or DSL modem by reconnecting the power supply to the modem. 6. Before plugging the power cord into the Router, plug the cord into the wall, then plug the cord into the Router's power jack. 7. Verify that your modem is connected to the Router by checking the lights on the front of the Router. The green light labeled "WAN" should be ON if your modem is connected correctly to the Router. If it is not, recheck your connections. 8. Verify that your computer is connected properly to the Router by checking the lights labeled "LAN 1,2,3,4". The light which corresponds to the numbered port that you connected your computer to should be ON if your computer is connected properly. 4 Continue Following the Wizard's Instructions The Wizard will take you through the completion of the process. 5 Begin Surfing! Congratulations! You have finished installing your new Belkin Router. belkin.com Belkin Corporation 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Express Business Park Shipton Way • Rushden • NN10 6GL United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin Components B.V. Starparc Building • Boeing Avenue 333 1119 PH Schiphol-Rijk • The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin, Ltd. 7 Bowen Crescent • West Gosford NSW 2250 • Australia Tel: +61 (0) 2 4372 8600 Fax: +61 (0) 2 4372 8603 Belkin Tech Support US: 310.898.1100 ext. 2263 800.223.5546 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 666 040 P74223 © 2003 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.