Belkin F5U098 F5U098 Manual - Page 6
Installation - bios
UPC - 722868569573
View all Belkin F5U098 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
INSTALLATION Windows 95/98/Me Driver Installation 1. Make sure your computer is completely powered down by powering off the PC and unplugging the power cord. Remove the outer cover. 2. Insert the PCI Card into a PCI slot that supports bus-master DMA. (Your computer's manual should identify the bus-master slots.) Connect your hard drive(s) to the controller card at this time. Close the case and plug in the power cord. 3. Restart your computer and insert the installation CD into your CD-ROM drive. 4. The PCI Card on-board BIOS will automatically detect the drives connected to it once power-up is complete. 5. When your Windows operating system has finished loading, the PCI Card will be detected and the "New Hardware Wizard" will detect "PCI Raid Controller". Click "Next". 6. Select "Search for best driver for your device (Recommended)". Click "Next" (for Windows Me, choose "Automatically search for the best driver [Recommended]"). 7. Select "Specify a location" and enter the path to the driver folder on your CD-ROM drive (typically "D:\Driver" where "D:" is the letter of your CD-ROM drive). 4