Belkin F5U099 F5U099 Manual - Page 8
Installation
View all Belkin F5U099 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
P74065-F5U099-man_6-02.qxd 6/24/02 5:06 PM Page 4 INSTALLATION To install the Floppy Drive Kit, please follow below steps: 1. Unplug your computer. 2. Remove the cover from your computer. Refer to your computer system manual for instructions. 3. If you are replacing a current floppy drive, pay close attention to the cables that are connected to the floppy drive. You will use the same cables to connect your new Belkin floppy drive. 4. Refer to your computer system manual for instructions regarding the mounting of disk drives. Fig. 1 5. If your computer has an available 3.5-inch drive bay, insert the floppy disk drive directly into the drive bay, and secure the drive using the six mounting screws provided. 6. If you need to mount the floppy drive into a 5.25-inch drive bay, mount the floppy drive into the 5.25-inch drive bay adapter as shown in Fig. 1. 7. Connect the power cable as shown in Fig. 1. 4