Belkin F6D3000 F6D3000 Quick Install Guide

2.1

You will be prompted to remove the CD

and insert your Card. To do so, please

remove the software CD from your CD-ROM

drive, click “OK” and then shut down your

computer and disconnect the power.

2.2

Remove the screws behind your computer

case that secure the computer cover

and remove the cover. Touch any metal

part of the case to discharge static

electricity and avoid damage to the

product or your computer.

IMPORTANT:

Install the Software Before Inserting

the Card

Note:

If the Belkin Setup Utility screen does not appear

within 20 seconds, access your CD-ROM by

double-clicking on the “My Computer” icon

and double-click on the CD-ROM drive that the

installation CD has been placed in. Double-click

on the folder named “files”, then double-click on

the icon named “setup.exe”.

Make sure you have

the following:

System Requirements

PC-compatible computer with:

CD-ROM drive

One available PCI slot

Windows

®

98SE, Me, 2000, or XP

Start Quick Setup

Make sure you have the following

1

1.

Install

2.

Insert

Insert the Card into your Computer

1.1

Insert the Installation Software CD into your

CD-ROM drive.

1.2

The Belkin Setup Utility screen will

automatically appear. (This may take

15-20 seconds.) Click “install” to start

the installation.

1.3

Click “Next” to install the software.

Insert

4

Install

3

Install

2

1.4

Choose an installation location, then click

“Next” to accept the default location or

click “Browse” to select a different location

before clicking “Next”.

Next

(click)

OK

(click)

Dual-Band Wireless A+G

Desktop Network Card

Installation

Software CD

2.3

Locate an empty PCI expansion slot. It

is usually white in color. Confirm that

the Card will fit into the slot you have

chosen. Keep in mind that the included

antenna needs to be oriented with the top

pointing up. If there are cables and other

connectors in the way, try to pick the PCI

slot that has the fewest obstructions to the

correct positioning of the antenna.

2.4

Remove the metal bracket cover from the

back of the computer that corresponds

to the PCI slot you selected. If there is

a screw, place it in a safe place, as you

will be using it to attach the Card to the

computer later.

2.5

Push the Card firmly into the PCI slot

that you have chosen. Apply pressure as

needed until the connector is fully seated.

2.6

Now secure the Card with the screw that

you previously placed in a safe place.

Insert

5

Next

(click)

Install

(click)

2.7

Turn the antenna until it is vertical and

pointing up.

2.8

Replace the computer’s cover. Now that

the Card is installed, you can reconnect

the power cord, and turn it back on.

2.9

The Found New Hardware Wizard will

appear. (This may take 15-20 seconds.)

Select “Install the software automatically”

and click “Next” to install the hardware.

Next

(click)

Insert

6

Belkin F6D3000 F6D3000 Quick Install Guide

Belkin F6D3000 Manual

Belkin F6D3000 manual content summary: