Belkin F7C007 User Guide - Page 5

7 After you have finished using your master device and turned it off using your remote or device power button, your peripheral devices will also turn off within 30 seconds and no longer consume any electricity. indicator lights . The "Protected" light should be on when the power switch is turned on. If this light goes out at any time, it either means the circuit breaker has tripped and should be reset, or your Surge Protector was sacrificed to protect your equipment and . should be replaced. The "Not Grounded" light should not be on. If this light turns on, you may have a ground-wiring problem in your home and you should contact an electrician to properly ground the outlet.Connecting a Belkin Surge Protector to an improperly grounded outlet will void all Belkin warranties. If your home is properly grounded and the Surge Protector's "Not Grounded" light is on, please contact Belkin for your free replacement. product features . A uto-calibration for maximum compatibility with products. - A microprocessor inside the Conserve Smart AV determines when the MasterControlled Outlets turn on and off. Intelligence built into the microprocessor can recognize the difference between a television powering down and a dark scene on the screen to prevent accidental switching of the Master- . Controlled Outlets. 1 Master Outlet (Always On). Suggested use with the following devices: . - Television or Stereo Amplifier 5 Master-Controlled Outlets (Switch on and off in response to power state of Master Outlet). Suggested use with the following devices: - DVD Players - VCRs - Speakers / Subwoofers - Games Consoles