Belkin F8T063uk F8T063uk User Manual - English - Page 5

INSTRUCTIONS 4. Follow the instructions for your mobile phone to pair it to the headset 5. When prompted by your phone, enter the PIN code for the headset (1234) 6. Once paired, the headset will automatically switch to STANDBY mode - Green LED will flash continuously 7. Your headset and phone are now paired and ready for use 6 OPERATING INSTRUCTIONS Switching the headset on and off • Switching ON - Press the Multifunction button for 2 seconds. A low-high tone and flashing GREEN LED indicates the headset is switched ON • Switching OFF - Press the Multifunction button for 2 seconds. A high-low tone indicates the headset is switched OFF Answering/Terminating calls • When your phone receives a call, the phone ring tone will be heard in the headset. Pressing the Multifunction button ONCE will answer the call. Pressing the Multifunction button again terminates the call Making a call (voice dialling*) • Press the Multifunction button to activate voice dialling • Upon hearing a beep, say the name of the person you wish to call • Your phone will place the call automatically. In the event the phone does not recognise the your voice, please repeat the steps above. • Once connected, pressing the Multifunction again will terminate the call • If the desired number has no voice tag**, you will need to use the phone keypad to place the call manually. Using this method, the call will automatically transfer to the headset. Pressing the Multifunction button will terminate the call *Check your phone manual to see if this feature is supported **Please refer to your phone manual for information on creating voice tags 7