Belkin F8V7D004-SS Wireless Internet Connection Kit User Manual - Page 11
Installation Instructions for Windows, NT Users
View all Belkin F8V7D004-SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation Instructions for Windows® NT Users Before you begin installing your Belkin Wireless Internet Connection on your Windows® NT operating system, please verify that your system can support this software. You will need: s A PC or PC-compatible computer with a Windows NT 4.0 operating system, at least 16 MB RAM, 1 MB space free on your hard drive, Intel 486 or above processor, available serial (COM) port, and CD-ROM drive. s An activated web enabled cell phone. Please call your carrier about activating your web enabled cell phone s The CD-ROM and data cable that were included with your Belkin Wireless Internet Connection. Verify that one end of the data cable has a 9-pin female serial connection and the other end has a customized phone connector. Attaching the Phone to Your Computer These steps will prepare your phone for action. 1. It makes no difference whether your phone is 'On' or 'Off'. You can connect the phone connector end of the data cable to your phone port. Depending on your phone model, you may have to open a cover to access the port. 2. Your serial port has 9 pins and is usually found in the back or side of the computer. Disconnect any other device that's using this port before connecting the large connector of your data cable to the serial port. Be sure to tighten the screws once the connector is in place. 3. You may now switch on your phone and computer if they're not already active. 9