Belkin F8Z183 User Manual - Page 10

Using the TuneBase FM Manually Selecting an FM Frequency If you want to use a specific frequency, you can manually select it on your TuneBase FM. 1. Tune your stereo to a frequency with a weak signal. If possible, try to find a frequency that is not broadcasting a radio station. 2. Press the + or - button on your TuneBase FM to select the same frequency. Pressing and holding either button will provide faster tuning. Storing a Preset Frequency When you find a clear FM frequency, you can store it for later use. You can store two radio frequencies using the 1 and 2 preset buttons. 1. If you are not currently on the frequency you want to store, use the + or - buttons to select the frequency. 2. Press and hold the 1 or 2 preset button for two seconds. You will hear a beep when the new frequency is programmed. Selecting a Preset Frequency Press the 1 or 2 preset button. Your TuneBase FM will change to the preset frequency. Using the Audio-Out Jack and a Cassette Adapter Your TuneBase FM is equipped with a 3.5mm audio-out jack. If you cannot find a clear FM frequency, you can connect the 3.5mm audio-out jack on your TuneBase FM directly to your stereo (if line-in is available) or to a cassette adapter. Note: When making this type of connection, TuneBase FM and your car stereo should be turned off to eliminate possible damage caused by Electrostatic discharge (ESD). Using the TuneBase FM | 08