Beltronics BELV965 Owner's Manual - Page 9
Details of Programming
View all Beltronics BELV965 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Details of Programming Pilot (Power-on indication) Note: When you are using the Dark mode, the display will only show HD, AD, or CD, (Highway-Dark, AutoScan-Dark, or CityDark). Pilot HWY (Full description) In this setting, V965 will display "Highway," "City," or "AutoScan" as its power-on indication. (factory default) Pilot H (Letter) In this setting, V965 will display "H" for Highway, "C" for City, and "A" for AutoScan. Voice Voice On (Voice announcements on) In this setting, all radar, laser, and SWS messages (if programmed) will be announced using a digital voice. Voice Off (Voice announcements off) In this setting, only the distinct audio tone will be heard when a radar, Laser, or SWS message is detected. Power-on Sequence PwrOnSTD (Standard) In this setting, each time you turn on V965, it will display "BEL V965," "Laser," "Kaband," "K-band," "X-band," "Safety," followed by a brief X-band alert. (factory default) If any bands have been changed from the factory default settings, a double X-band tone and corresponding message (i.e. "SWS ON"), will alert you that one or more bands have been changed. PwrOnFST (Fast power-on) In this setting, V965 will provide a single X-band tone. If any bands have been changed from the factory default settings, a double X-band tone and corresponding message (i.e. "SWS ON"), will alert you that one or more bands have been changed. 14 AutoMute aMute ON (AutoMute on) In this setting, V965's audio alerts will initially be at the volume you set, but after a few seconds, V965 will automatically reduce the volume level, to keep you informed, but not annoyed. (factory default) aMuteOFF (AutoMute off) With AutoMute off, V965's audio alerts will remain at the volume you set for the duration of the radar encounter. City Mode Sensitivity City STD (Standard) In this setting, when you put V965 in the City mode, X-band sensitivity is significantly reduced, to reduce annoyance from X-band intrusion alarms and motion sensors. (factory default) City LoX (Low X band sensitivity) In this setting, when you put V965 in the City mode, X-band sensitivity is reduced more than the standard setting. This will reduce X-band alarms from other sources even further, but also significantly reduces range to X-band traffic radar. City NoX (No X-band sensitivity) In this setting, when you put V965 in the City mode, V965 will not respond to any X-band signals. WARNING: Only choose this setting if you are absolutely certain that there are no X-band traffic radar units where you drive. NOTE: These settings only apply when V965 is operated in City mode. X-band sensitivity is not affected when used in "AutoScan" or "Highway" modes. 15