Beltronics Express 925 Owner's Manual - Page 12

Windshield Mounting

Get Beltronics Express 925 PDF manuals and user guides View all Beltronics Express 925 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

To achieve optimum performance, regardless of which mounting position you choose, follow these basic steps: 1. Consider occupant safety when selecting a mounting location.Choose a location where the unit will not be hazardous in case of an accident. 2. For optimum detection, position your unit with a clear, unobstructed view of the road from the front and rear. 3. Do not allow the unit to make contact with the windshield. This will eliminate unnecessary vibration. 4. Avoid placing your unit in direct sunlight. During the summer, the interior of an enclosed vehicle can sometimes reach temperatures that will cause premature aging of the unit. 5. Your detector is not waterproof; exposure to water may cause damage. Dash Mounting 1. Select an area that is relatively level, clean and dry. Adhere the soft portion of the enclosed hook and loop fastener to this area and the corresponding hard portion to the bottom of your unit. 2. Fasten unit to dash by placing hook and loop pieces together. Windshield Mounting 1. Remove the mounting bracket cover on top of the unit by pressing on the raised dots and pushing outward. Store the cover in a safe place. 2. Clean the selected windshield area, position the suction-cup mount on the windshield, and press firmly on each suction-cup to secure it in place. 3. Use a screw driver or a small coin to adjust the angle of the suction-cup mount until the base plate is level. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
To achieve optimum performance, regardless of which
mounting position you choose, follow these basic steps:
1.
Consider occupant safety when selecting a mounting
location.Choose a location where the unit will not be
hazardous in case of an accident.
2.
For optimum detection, position your unit with a clear,
unobstructed view of the road from the
front and rear.
3.
Do not allow the unit to make contact with the windshield.
This will eliminate unnecessary vibration.
4.
Avoid placing your unit in direct sunlight. During
the summer, the interior of an enclosed vehicle can
sometimes reach temperatures that will cause premature
aging of the unit.
5.
Your detector is not waterproof; exposure to water may
cause damage.
Dash Mounting
1.
Select an area that is relatively level, clean and dry. Adhere the
soft portion of the enclosed hook and loop fastener to this area
and the corresponding hard portion to the bottom of your unit.
2.
Fasten unit to dash by placing hook and loop pieces together.
Windshield Mounting
1.
Remove the mounting bracket cover on top of the unit by pressing
on the raised dots and pushing outward. Store the cover in a safe
place.
2.
Clean the selected windshield area, position the suction-cup mount
on the windshield, and press firmly on each suction-cup to secure
it in place.
3.
Use a screw driver or a small coin to adjust the angle of the
suction-cup mount until the base plate is level.
11