Beltronics Express 935 Owner's Manual - Page 7
Memory Retention of Feature Selections, Adjusting the Audio Level, DARK Bright/Dim/Dark Button - review
View all Beltronics Express 935 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
sample alerts) press CITY or AUDIO to move forward or backward through the alerts. During sws™ sample alerts press CITY to move forward in the sws™ message list. "MSG 1" will appear initially in the display confirming your selection. Pressing the AUDIO button allows you to listen to the sws™ message while viewing it in the display. Press the CITY button again to step to the next message; press the AUDIO button to review, and so on. This allows you to review all 60 messages. To exit Tutorial Mode, press the PWR/VOL button and your unit will be ON and ready to receive signals. Memory Retention of Feature Selections Any time EXPRESS 935 is turned OFF or unplugged from the cigarette lighter socket, all feature settings are retained in the unit's memory. Memory retention eliminates the need to reset your preferred feature settings each time your unit is turned OFF and then back ON. Adjusting the Audio Level Once your unit has completed the power up test sequence, the audio level can be adjusted by holding the PWR/VOL button down. As you hear the audio level change, the display will provide a visual reference of the audio level. To reverse the direction in which the audio level increases/decreases, briefly release, then hold down the PWR/VOL button again. DARK (Bright/Dim/Dark) Button The DARK button allows selection of a dim or dark setting for the display. To engage dim mode, press the DARK button once. A single "beep" coupled with the brief illumination of "DIM" on the display confirms your selection. To completely cancel the illumination of the display during an alert, press DARK a second time. A single "beep" coupled with the brief illumination of "DARK" in the display confirms your selection. While in dark mode, you will notice an "H" (highway mode) or "C" (city mode) remains dim to confirm your unit is receiving power. To return to a full bright setting, press the DARK button a third time; two "beeps" confirm this selection. Use of the DARK button does not affect audio alerts. Important-if you press the the DARK button and do not receive audible confirmation, the audio level has been set too low. 6