Beltronics Express 936 Owner's Manual - Page 11
Dash Mounting, Windshield Bracket Assembly, Windshield Mounting
View all Beltronics Express 936 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
regardless of which mounting position you choose, follow the basic steps on the following page: 1. Consider occupant safety when selecting a mounting location. Choose a location where the unit will not be hazardous in case of an accident. 2. For optimum detection, position your unit with a clear, unobstructed view of the road from the front and rear. 3. Do not allow the unit to make contact with the windshield. This will eliminate unnecessary vibration. 4. Avoid placing your unit in direct sunlight. During the summer, interior temperatures of an enclosed vehicle can sometimes reach temperatures that will cause premature aging of the unit. 5. Your detector is not waterproof; exposure to water may cause damage. Dash Mounting 1. Select an area that is relatively level, clean and dry.Adhere the soft portion of the enclosed hook and loop fastener to this area and the corresponding hard portion to the bottom of your unit. 2. Fasten unit to dash by placing hook and loop pieces together. Windshield Bracket Assembly The visor clip is fully assembled. To assemble the windshield bracket, follow this diagram. Windshield Mounting 1. Remove the mounting bracket cover on top of the unit by pressing on the raised dots and pushing outward. Store the cover in a safe place. 2. Clean the selected windshield area, position the suction-cup mount on the windshield, and press firmly on each suction cup to secure it in place.