Beltronics Express 946 Owner's Manual - Page 10

Entering Selectable Features Mode 1. With the unit , press and hold the  button, then press the ⁄ button. The amber X  will illuminate and a short "beep" will sound. 2. Immediately after the "beep", led # will show the status of the sws™ selectable feature. To select led Guard®), press the  button. Use the  button to toggle between the two s. 3. If illumination of the selected led is solid, feature is , but may be canceled by pressing the  button. Two "beeps" will sound, confirming feature is . 4. If the selected  is flashing, the feature is , but may be activated by pressing the  button. A single "beep"and solid illumination will confirm the feature is . 5. Press the p/v button to retain your new settings for selectable features. Two "beeps" will confirm that you have exited from selectable features. Your unit will be  and ready for operation. General Guidelines Do not mount your unit directly behind windshield wipers or mirrored sunscreens which block Radar and Laser signals and substantially reduce warning range. Unlike "after market" mirrored sun-screens, regular tinted glass does not affect Radar reception. Radar signals are also reflected by the "heated windshields" known as Instaclear® and ElectriClear® available as an option on some vehicles. This type of windshield makes any dash, visor or windshield mounted detector ineffective. (If in doubt, check with an appropriate dealership to see if this applies to your vehicle.) To achieve optimum performance, regardless of which mounting position you choose, follow these basic steps on the following page:  Instaclear is a registered trademark of the Ford Motor Company. ElectriClear is a registered Trademark of Libbey, Owens, Ford, and Delco-Remy.