Beltronics RX75 Installation Manual - Page 1

12770_Bel Pro Remote_Manual 6/2/03 10:40 PM Page 1 Scale: 100% CUSTOM INSTALLED RADAR/LASER SAFETY SYSTEM MODE L RX75 BEL Front Radar Receiver • Miniature weather-proof Radar Receiver • Universal mounting bracket with stainless steel hardware • Built-in 6 foot shielded cable with waterproof connector • 13 foot shielded cable with in-line grommet and waterproof connector • 12 nylon wire ties to secure cable Front Laser Receiver • Weather-proof sensor • 13 foot shielded cable with in-line grommet • Universal mounting bracket with stainless steel hardware Miniature Display Controller • User Display mounts easily to instrument pod, dashboard, or console • Velcro and adhesive pads provided for secure mounting • Optional hidden display included MODE L RX75 Interface • Central module connects to switched 12-volt power and ground • All components plug directly in using modular connections • 3M connector taps into existing vehicle wiring Rear Laser Receiver • Weatherproof license plate mounted sensor • 30-foot cable with modular connector Documentation • Comprehensive Owner's Manual • Installation Manual Built-in Diagnostics • Confirms all components are operational TM 5442 West Chester Road, West Chester, Ohio 45069 Professional Series Sales/Service 800-341-2288 • www.beltronicspro.com ©2003 SWS™ is a trademark of SWS LC. Features, specifications and prices subject to change without notice. Professional Series IMPORTANT NOTES Read This First Please read both sides of these instructions before starting your installation. For the easiest trouble-free installation, install the Interface first, and wire it to a 12-volt switched circuit. Then before installing the other components, plug all of them into the Interface and power up the unit to confirm proper operation. Important Installation Warnings 1 A professional installer must install your new BEL . Installation of this system requires experience and expertise in automotive electronics. Car Audio specialists and many car dealers can install BEL for you. 2 Attempting to install this product without expertise in automotive electronics installation can cause personal injury, or damage to your vehicle. 3 If your vehicle is damaged during installation, its safety systems may be compromised, which could cause personal injury or property damage. 4 Improper installation may void the warranty. Performance Warning To get the best performance possible, the mounting location of the Radar Receiver is critical. Although radar signals will pass through some types of plastic, mounting the Radar Receiver so that it has a clear "view" of the road will ensure maximum warning. Since Laser signals will not pass through any objects, including plastic, it is critical that the Laser Receivers be mounted perfectly level, and have an unobstructed "view" of the road.