Beltronics V8 Owner's Manual - Page 9

Details of Programming, Technical Details - detector

Page 9 highlights

Details of Programming City Mode Sensitivity City STD (Standard) In this setting, when you put your V8 in the City mode, X-band sensitivity is significantly reduced, to reduce annoyance from X-band intrusion alarms and motion sensors. (factory default) City LoX (Low X band sensitivity) In this setting, when you put your V8 in the City mode, X-band sensitivity is reduced more than the standard setting.This will reduce X-band alarms from other sources even further, but also significantly reduces range to X-band traffic radar. City NoX (No X-band sensitivity) In this setting, when you put your V8 in the City mode,V8 will not respond to any X-band signals. Bands BandsDFT In this setting, all North American radar and laser frequencies are monitored.This is the factory setting and it is recommended that you use your V8 in this mode. BandsMOD In this setting, your V8 will warn you with an audible alert, and associated text message stating which band has changed from the original factory setting (i.e."SWS ON").This warning is displayed during the start up sequence (standard or fast). WARNING: Only choose this setting if you are absolutely certain that there are no X-band traffic radar units where you drive. NOTE: These settings only apply when the V8 is operated in City mode. X-band sensitivity is not affected when used in "AutoScan" or "Highway" modes. 14 Technical Details Features and Specifications Operating Bands • X-band 10.525 GHz ± 25 MHz • K-band 24.150 GHz ± 100 MHz • Ka-band 34.700 GHz ± 1300 MHz • Laser 904nm, 33 MHz bandwidth Radar Receiver / Detector Type • Superheterodyne,VTO • Scanning Frequency Discriminator • Digital Signal Processing (DSP) Laser Detection • Quantum Limited Video Receiver • Multiple Laser Sensor Diodes Display Type • 280 LED Alphanumeric • Bar Graph • 3 Levels of Brightness, plus Dark Mode Power Requirement • 12VDC, Negative Ground • Power cord (included) Programmable Features • Power-On Indication • Voice Alerts • Power-On Sequence • AutoMute • City Mode Sensitivity • Bands Sensitivity Control • Highway,AutoScan and City Auto Calibration Circuitry VG2 Immunity Dimensions (Inches) • 1.25 H x 2.75 W x 4.75 L 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

City Mode Sensitivity
City STD
(Standard)
In this setting, when you put your V8 in the
City mode, X-band sensitivity is significantly
reduced, to reduce annoyance from X-band
intrusion alarms and motion sensors.
(factory default)
City LoX
(Low X band sensitivity)
In this setting, when you put your V8 in the
City mode, X-band sensitivity is reduced
more than the standard setting.This will
reduce X-band alarms from other sources
even further, but also significantly reduces
range to X-band traffic radar.
City NoX
(No X-band sensitivity)
In this setting, when you put your V8 in the
City mode,V8 will not respond to any
X-band signals.
NOTE: These settings only apply
when the V8 is operated in City
mode. X-band sensitivity is not
affected when used in “AutoScan”
or “Highway” modes.
WARNING: Only choose this
setting if you are absolutely certain
that there are no X-band traffic
radar units where you drive.
Bands
BandsDFT
In this setting, all North American radar and
laser frequencies are monitored.This is the
factory setting and it is recommended that
you use your V8 in this mode.
BandsMOD
In this setting, your V8 will warn you with
an audible alert, and associated text
message stating which band has changed
from the original factory setting (i.e. “SWS
ON”).This warning is displayed during the
start up sequence (standard or fast).
Features and Specifications
Operating Bands
• X-band 10.525 GHz ± 25 MHz
• K-band 24.150 GHz ± 100 MHz
• Ka-band 34.700 GHz ± 1300 MHz
• Laser 904nm, 33 MHz bandwidth
Radar Receiver / Detector Type
• Superheterodyne,VTO
• Scanning Frequency Discriminator
• Digital Signal Processing (DSP)
Laser Detection
• Quantum Limited Video Receiver
• Multiple Laser Sensor Diodes
Display Type
• 280 LED Alphanumeric
• Bar Graph
• 3 Levels of Brightness, plus Dark Mode
Power Requirement
• 12VDC, Negative Ground
• Power cord (included)
Programmable Features
• Power-On Indication
• Voice Alerts
• Power-On Sequence
• AutoMute
• City Mode Sensitivity
• Bands
Sensitivity Control
Highway,AutoScan and City
Auto Calibration Circuitry
VG2 Immunity
Dimensions (
Inches)
• 1.25 H x 2.75 W x 4.75 L
14
15
Details of Programming
Technical Details