Beltronics Vector 945 Owner's Manual - Page 12

Controls and Features TUTORIAL MODE The Tutorial Mode allows you to become more familiar with all audible and visual alerts. The message "TUTORIAL" appears in the display followed by the audio and corresponding Text Message for "LASER", "Ka AUDIO", "K AUDIO", "X AUDIO", sample Radar alert and "SAFETY WARNING SYSTEM SAMPLE ALERTS". Three sample SWS™ messages are then presented in the display along with the corresponding Digital Voice Messages. You can access all five SWS™ category messages by pressing the AUDIO button. "MSG 1" will appear in the display once AUDIO is pressed. To move forward in the list, press the CITY button; to move backward in the list, press the DARK button. Continue the steps above to play all 5 SWS™ category messages. To exit Tutorial Mode, press the PWR button and your unit will be on and ready to receive signals. Set and Forget Memory Any time your unit is turned off or unplugged from the cigarette lighter socket, all feature settings you have selected are retained in the unit's memory. Set and Forget Memory eliminates the need to reset your preferred feature settings each time your unit is turned off and then back on. Reset to Factory Settings You can reset your unit to factory settings for Start-Up mode, volume, DARK, AUDIO, CITY and Selectable Features. To reset, press and hold the CITY button until the display shows "RESET". Two "beeps" will sound and your unit will cycle through the NORMAL Start-Up Mode. DARK (Bright/Dim/Dark) Button The DARK button allows selection of a bright, fully adjustable dim or dark mode. Your unit is factory preset to full bright display. To engage dim mode, press and hold the DARK button. The display will cycle through various levels of dim illumination. Release the button at your chosen level. To engage dark mode, press the DARK button a second time. A single "beep" coupled with the brief illumination of "DARK" on the display confirms your selection. 9