BenQ 9H.J1P77.Q4A User Manual - Page 49
Function, Description, Audio Settings, Standby Monitor, Lamp Settings, Security, Settings, Baud Rate
UPC - 840046016791
View all BenQ 9H.J1P77.Q4A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5. SYSTEM SETUP: Advanced menu Function (default setting/value) Description Audio Settings Mute (Off) Volume (5) Power On/Off Ring Tone (On) See "Adjusting the sound" on page 41 for details. Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER 1 Standby Monitor and MONITOR OUT jacks are correctly connected to devices. Out See "Connecting a monitor (MP525 ST only)" on page 19 for (Off) how to make the connection. Enabling this function slightly increases the standby power consumption. Lamp Mode (Normal) See "Setting Lamp Mode as Economic" on page 52 for details. Reset Lamp Timer Lamp Settings See "Resetting the lamp timer" on page 56 for details. Equivalent Lamp Hour See "Getting to know the lamp hour" on page 52 for details on how the total lamp hour is calculated. Security Settings Change Password You will be asked to enter the current password before changing to a new one. See "Utilizing the password function" on page 27 for details. Power On Lock (Off) See "Utilizing the password function" on page 27 for details. Baud Rate (115200) Selects a baud rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Test Pattern (Off) Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and check that the projected image is free from distortion. Operation 49