BenQ BL2411PT BL2411PT User Manual - Page 10

Connect the PC video cable, To Connect the D-Sub Cable

Get BenQ BL2411PT PDF manuals and user guides View all BenQ BL2411PT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Extend the stand to the maximum extended position. And rotate the monitor 90 degrees counterclockwise as illustrated. You might want to adjust the monitor stand height. See Adjusting the monitor height on page 14 for more information. You should position the monitor and angle the screen to minimize unwanted reflections from other light sources. -5O ~ +20O 2. Connect the PC video cable Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems. To Connect the D-Sub Cable Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. 10 How to assemble your monitor hardware Either

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
10
How to assemble your monitor hardware
Extend the stand to the maximum extended position.
And rotate the monitor 90 degrees counterclockwise as
illustrated.
You might want to adjust the monitor stand height. See
Adjusting the monitor height on page 14
for more
information.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2. Connect the PC video cable
Do not use both DVI-D cable and D-Sub cable on the same
PC. The only case in which both cables can be used is if they
are connected to two different PCs with appropriate video
systems.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end
without the ferrite filter) to the monitor video socket.
Connect the other end of the cable (at the end with the
ferrite filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
-5
-5
O
O
~ +20
~ +20
O
-5
O
~ +20
O
Either