BenQ BenQ MS504 DLP 3D Projector User Manual for MS504 and MX505 - Page 48
Replacing the lamp, Resetting the lamp timer, SYSTEM, SETUP: Advanced, Lamp Settings, MODE/ENTER
View all BenQ BenQ MS504 DLP 3D Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Replacing the lamp Turn the power off and disconnect the projector from the power outlet. Please contact service personnel for changing the lamp or visit http://www.BenQ.com. Resetting the lamp timer After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER. The Lamp Settings page appears. Highlight Reset Lamp Timer. A warning message appears asking if you want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp time will be reset to "0". Do not reset if the lamp is not new or replaced as this could cause damage. 48 Maintenance
Maintenance
48
Replacing the lamp
Turn the power off and disconnect the projector from the power outlet. Please contact
service personnel for changing the lamp or visit
.
Resetting the lamp timer
After the startup logo, open the On-Screen Display (OSD) menu. Go to the
SYSTEM
SETUP: Advanced
>
Lamp Settings
menu. Press
MODE/ENTER
. The
Lamp
Settings
page appears. Highlight
Reset Lamp Timer
. A warning message appears asking
if you want to reset the lamp timer. Highlight
Reset
and press
MODE/ENTER
. The lamp
time will be reset to “0”.
Do not reset if the lamp is not new or replaced as this could cause damage.