BenQ BenQ MW814ST Short-Throw Network Projector MW814ST User Manual - Page 55
Resetting the lamp timer, SYSTEM, SETUP: Advanced, Lamp Settings, MODE/ENTER, Reset Lamp Timer, Reset
![]() |
View all BenQ BenQ MW814ST Short-Throw Network Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Do not turn the power on with the lamp cover removed. Resetting the lamp timer 15. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER. The Lamp Settings page displays. Highlight Reset Lamp Timer. A warning message is displayed asking if you want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp time will be reset to "0". Do not reset if the lamp is not new or replaced as this could cause damage. Maintenance 55
![](/manual_guide/products/benq-mw814st-mw814st-user-manual-0973eed/55.png)
Maintenance
55
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
15.
After the startup logo, open the On-Screen Display (OSD) menu. Go to the
SYSTEM
SETUP: Advanced
>
Lamp Settings
menu. Press
MODE/ENTER
. The
Lamp Settings
page displays. Highlight
Reset Lamp Timer
. A warning message is displayed asking if
you want to reset the lamp timer. Highlight
Reset
and press
MODE/ENTER
. The lamp
time will be reset to “0”.
Do not reset if the lamp is not new or replaced as this could cause damage.