BenQ EX2710R User Manual - Page 20
Connect the audio cable., Connect USB devices., Install the I/O cover.
View all BenQ EX2710R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4. Connect the audio cable. You may connect headphones to the headphone jack found on the back side of the monitor. Pass the cable through the cable management hole on the stand arm. 5. Connect USB devices. To Connect the USB Type-B Cable Connect the USB cable between the PC and the monitor (via the upstream USB port at the back). This upstream USB port transmits data between the PC and the USB devices connected to the monitor Connect USB devices via other USB ports (downstream) on the monitor. These downstream USB ports transmit data between connected USB devices and the upstream port. 6. Install the I/O cover. Align the I/O cover with the holes on the back of the monitor, and press the sides and the bottom of the cover against the holes to lock it into place. Push from the 1 bottom of the cover and check if the it has been installed properly. 2 20