BenQ MP610 User Manual - Page 46
Temperature information, Wait about 5 seconds to let the OSD disappear. - reset lamp hours
UPC - 840046012731
View all BenQ MP610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
10. Replace the lamp cover on the projector. 11. Tighten the screw that secures the lamp cover. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 12. Restart the projector. Do not turn the power on with the lamp cover removed. 13. Resetting the lamp counter Do not reset if the lamp is not replaced as this could cause damage. i. Press and hold the Exit 5 button on the projector for 5 seconds to display the total used lamp time. ii. Press Auto on the projector or on the remote control to reset the lamp hour to "0". iii. Wait about 5 seconds to let the OSD disappear. Temperature information When the Temperature warning light is on, it is warning you of the following possible problems: 1. The internal temperature is too high. 2. The fans are not working. Turn the projector off and contact qualified service personnel for further help. For more detailed information, please refer to "Indicators" on page 41. 40 Maintenance