BenQ MP770 User Manual - Page 14

Remote control 2. 12 1 13 2 14 3. 3 15 4 5 16 4. 4 4 6 17 7 4 18 8 5. 9 19 10 11 20 6. 1. II Power 7. Toggles the projector between standby mode and on. When the projector is in standby mode, press once to turn the projector on. 8. When the projector is on, press twice to turn the projector to standby. See "Start up" on page 31 and "Shutting down the projector" on page 43 for details. ASPECT Selects the display aspect ratio. See "Selecting the aspect ratio" on page 37 for details. WIRELESS Turns on or off the wireless connection menu. See "Wireless connection (optional)" on page 22 for details. Keystone/ Arrow buttons ( / Up, / Left, / Down, / Right) Manually corrects distorted images resulting from an angled projection. When the On-Screen Display (OSD) menu is activated, the buttons are used as directional arrows to select the desired menu items and to make adjustments. See "Correcting keystone" on page 35 and "Using the menus" on page 46 for details. MENU/BACK Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves menu settings. See "Using the menus" on page 46 for details. BLANK Used to hide the screen image. To restore the image, press any button (except LASER) on the projector or remote control. See "Hiding the image" on page 40 for details. ENTER Enacts the selected On-Screen Display (OSD) menu item. See "Using the menus" on page 46 for details. CONTRAST Displays the Contrast adjustment bar. To adjust the value, press the directional arrow buttons on the projector or remote control. 14 Introduction