BenQ MW721 DLP Network Projector MX720, MW721 User Manual - Page 11

Remote control 10. NETWORK SETTING 1 Enters network setting directly. 2 11. TEST 12 Displays the test pattern. 3 4 5 13 12. Keystone/Arrow buttons ( / Up, 14 15 / Down) 6 12 7 Manually corrects distorted images resulting 16 8 17 from an angled projection. 9 13. AUTO 18 19 10 20 Automatically determines the best picture 11 21 timings for the displayed image. 14. Right/Volume + Increases the projector volume. 1. Power ON/OFF When the On-Screen Display (OSD) menu is activated, the #4, #12 and #14 buttons Turns the projector on/off. are used as directional arrows to select the 2. Source selection buttons desired menu items and to make Selects an input source for display. 3. MENU/EXIT adjustments. 15. SOURCE Turns on the On-Screen Display (OSD) Displays the source selection bar. menu. Goes back to previous OSD menu, 16. PAGE +/ - exits and saves menu settings. Operates your display software program (on 4. Left/Volume - Decreases the projector volume. 5. MODE/ENTER a connected PC) which responds to page up/ down commands (like Microsoft PowerPoint). 17. MIC/VOL +/- Selects an available picture setup mode. Adjusts the microphone sound level. Activates the selected On-Screen Display 18. MUTE (OSD) menu item. 6. ECO BLANK Toggles projector audio between on and off. 19. ASPECT Used to hide the screen image. 7. LASER Selects the display aspect ratio. 20. SmartEco Emits visible laser pointer light for presentation purposes. 8. ZOOM+/ZOOM- Swithces the lamp mode between Eco/ Normal and SmartEco. 21. Numeric buttons Magnifies or reduces the projected image Enters numbers in network settings. size. 9. FREEZE Numeric buttons 1, 2, 3, 4 cannot be pressed when asked to enter password. Freezes the projected image. Introduction 11