BenQ MW851UST MW851UST & MX850UST user manual - Page 34

Operating in a high altitude environment, Creating your own startup screen

Get BenQ MW851UST PDF manuals and user guides View all BenQ MW851UST manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

• If you press POWER to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on. Operating in a high altitude environment We recommend you use the High Altitude Mode when your environment is between 1500 m -3000 m above sea level, and ambient temperature is between 0°C-35°C. Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under such a condition. To activate the High Altitude Mode: 1. Press MENU/EXIT and then press / until the SYSTEM SETUP: Advanced menu is highlighted. 2. Press to highlight High Altitude Mode and press / select On. A confirmation message displays. 3. Highlight Yes and press MODE/ENTER. Operation under "High Altitude Mode" may cause a higher decibel operating noise level because of increased fan speed necessary to improve overall system cooling and performance. If you use this projector under other extreme conditions excluding the above, it may display auto shut-down symptoms, which is designed to protect your projector from over-heating. In cases like this, you should switch to High Altitude mode to solve these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme conditions. Creating your own startup screen In addition to selecting the projector preset startup screen from among BenQ logo, Black or Blue screen, you can make your own startup screen that is a picture projected from your computer or video source. To create your own startup screen, project the picture you want to use as your startup screen from either a computer or video source. The rest steps are as follows. • Using the remote control 1. Press CAPTURE on the remote control. 2. A confirmation message displays. Press CAPTURE or MODE/ENTER again. 3. The message 'Screen Capturing...' displays while the projector is processing the picture. Please wait. 4. If the action is successful, you see the message 'Captured Succeeded' on the screen. The captured picture is saved as My Screen. 5. To view the captured picture displayed as the startup screen, set My Screen in the SYSTEM SETUP: Basic > Splash Screen menu and restart the projector. • Using the OSD menu 1. Press MENU/EXIT and then press / until the SYSTEM SETUP: Basic menu is highlighted. 2. Press to highlight MyScreen and press MODE/ENTER. 3. Repeat steps 2-5 in the "Using the remote control" section to capture and view the captured picture. In the unlikely event that the capturing action fails, change your target picture. Large-sized pictures may cause the capturing action to fail. If so, please choose a smaller one and try again. 34 Operation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Operation
34
•
If you press
POWER to turn off the projector without disabling panel key lock, the
projector will still be in locked status the next time it is turned on.
Operating in a high altitude environment
We recommend you use the
High Altitude Mode
when your environment is between 1500 m
–3000 m above sea level, and ambient temperature is between 0°C–35°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient
temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode
on under such a condition.
To activate the
High Altitude Mode
:
1.
Press
MENU/EXIT
and then press
/
until the
SYSTEM SETUP: Advanced
menu
is highlighted.
2.
Press
to highlight
High Altitude Mode
and press
/
select
On
. A confirmation
message displays.
3.
Highlight
Yes
and press
MODE/ENTER
.
Operation under "
High Altitude Mode
" may cause a higher decibel operating noise level
because of increased fan speed necessary to improve overall system cooling and
performance.
If you use this projector under other extreme conditions excluding the above, it may display
auto shut-down symptoms, which is designed to protect your projector from over-heating.
In cases like this, you should switch to High Altitude mode to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.
Creating your own startup screen
In addition to selecting the projector preset startup screen from among BenQ logo, Black or
Blue screen, you can make your own startup screen that is a picture projected from your
computer or video source.
To create your own startup screen, project the picture you want to use as your startup screen
from either a computer or video source. The rest steps are as follows.
•
Using the remote control
1.
Press
CAPTURE
on the remote control.
2.
A confirmation message displays. Press
CAPTURE
or
MODE/ENTER
again.
3.
The message '
Screen Capturing...
' displays while the projector is processing the
picture. Please wait.
4.
If the action is successful, you see the message '
Captured Succeeded
' on the screen. The
captured picture is saved as
My Screen
.
5.
To view the captured picture displayed as the startup screen, set
My Screen
in the
SYSTEM SETUP: Basic
>
Splash Screen
menu and restart the projector.
•
Using the OSD menu
1.
Press
MENU/EXIT
and then press
/
until the
SYSTEM SETUP: Basic
menu is
highlighted.
2.
Press
to highlight
MyScreen
and press
MODE/ENTER
.
3.
Repeat steps 2-5 in the “Using the remote control” section to capture and view the
captured picture.
In the unlikely event that the capturing action fails, change your target picture. Large-sized
pictures may cause the capturing action to fail. If so, please choose a smaller one and try
again.