BenQ MX511 DLP Projector User Manual - Page 46
Description of each menu, Wall Color, Aspect Ratio, Keystone, Position, Phase, H. Size, Digital Zoom
View all BenQ MX511 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Description of each menu • The default values listed in this manual, especially on pages 46-54, are for reference only. They may vary between the projectors due to the continuous improvement to the products. FUNCTION (default setting/ value) Wall Color Aspect Ratio Keystone Position Phase (depends on the selected input signal) H. Size Digital Zoom DESCRIPTION (default setting/value) Corrects the projected picture's color when the projection surface is not white. See "Using Wall Color" on page 35 for details. There are four options to set the image's aspect ratio depending on your input signal source. See "Selecting the aspect ratio" on page 32 for details. Corrects any keystoning of the image. See "Magnifying and searching for details" on page 32 for details. Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. This function is only available when a PC signal (analog RGB) is selected. Adjusts the clock phase to reduce image distortion. This function is only available when a PC signal (analog RGB) is selected. Adjusts the horizontal width of the image. This function is only available when a PC signal (analog RGB) is selected. Magnifies or reduces the projected image. See "Magnifying and searching for details" on page 32 for details. 1. DISPLAY menu 46 Operation