BenQ MX722 MX722 User Manual - Page 55
Troubleshooting
View all BenQ MX722 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cord. Attempting to turn the projector on again during the cooling process. Plug the power cord into the AC power jack on the projector, and plug the power cord into the power outlet. If the power outlet has a switch, make sure that it is switched on. Wait until the cooling down process has completed. No picture Cause Remedy The video source is not turned on or connected correctly. The projector is not correctly connected to the input signal device. The input signal has not been correctly selected. The lens cover is still closed. Turn the video source on and check that the signal cable is connected correctly. Check the connection. Select the correct input signal with the SOURCE key on the projector or remote control. Open the lens cover. Blurred image Cause Remedy The projection lens is not correctly focused. The projector and the screen are not aligned properly. The lens cover is still closed. Adjust the focus of the lens using the focus ring. Adjust the projection angle and direction as well as the height of the projector if necessary. Open the lens cover. Remote control does not work Cause Remedy The battery is out of power. There is an obstacle between the remote control and the projector. You are too far away from the projector. Replace the battery with new ones. Remove the obstacle. Stand within 8 meters (26 feet) of the projector. The password is incorrect Cause Remedy You do not remember the password. Please see "Entering the password recall procedure" on page 24 for details. Troubleshooting 55