BenQ PD2700U User Manual - Page 15
Connect the headphone., Connect USB devices.
View all BenQ PD2700U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
•Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device. •Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket. •Connect the plug of the mini DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket. After the monitor and the computer are powered on, if the image is not displayed, disconnect the DP cable. Connect the monitor to any video source other than DP first. Go to System and DisplayPort on the OSD menu of the monitor and change the setting from 1.4 to 1.1. Once the setting is done, unplug the current video cable and re-connect the DP cable. To go to the OSD menu, see Basic menu operation on page 29. 2. Tighten all finger screws to prevent the plugs from accidentally falling out during use. 3. Connect the other end of the video cable to an appropriate port of a digital output source (e.g., a computer). 3. Connect the headphone. You may connect headphones to the headphone jack found on the back side of the monitor. 4. Connect USB devices. 1. Connect the USB cable between the PC and the monitor (via the upstream USB port at the back). This upstream USB port transmits data between the PC and the USB devices connected to the monitor. 2. Connect USB devices via other USB ports (downstream) on the monitor. These downstream USB ports transmit data between connected USB devices and the upstream port. How to assemble your monitor hardware 15