BenQ SW240 User Manual - Page 13
Connect the PC video cable, To Connect the DVI-D Cable
![]() |
View all BenQ SW240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Tighten the thumbscrew on the bottom of the monitor base as illustrated. Orient and align the stand arm with the monitor ( 1 ), push them together until they click and lock into place ( 2 ). Gently attempt to pull them back apart to check that they have properly engaged. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface. You should position the monitor and angle the screen to minimize unwanted reflections from other light sources. Your monitor is an edge-to-edge monitor, handle it with care. Avoid finger pressure on the screen surface. Adjust the screen angle by placing your hands on the top and on the bottom of the monitor as illustrated. Excessive force on the display is prohibited. 2. Connect the PC video cable To Connect the DVI-D Cable Connect the plug of the DVI-D cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. 1 2 1 2 Either How to assemble your monitor hardware 13
![](/manual_guide/products/benq-sw240-user-manual-6c6b2ed/13.png)