BenQ W1110 User Manual - Page 42

System Setup : Advanced menu, Lamp Settings, Baud Rate, Test Pattern, Closed Caption, Quick Cooling

Get BenQ W1110 PDF manuals and user guides View all BenQ W1110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

System Setup : Advanced menu Submenu Lamp Settings Functions and Descriptions • Reset Lamp Timer Activate this function only after a new lamp is installed. When you select Reset, a "Reset Successfully" message displays to notify that the lamp time has been reset to "0". • Lamp Timer Select to learn the duration (in hours) of lamp usage which is automatically calculated by the bulit-in timer. Total (equivalent) lamp hour = 2.0 x (hours used in Normal mode) + 1.4 x (hours used in Economic mode) + 1.0 x (hours used in SmartEco mode) • HDMI Format Select an input source type for the HDMI signal. You can also manually select the source type. Different source types carry different standards for the brightness level. HDMI Settings Baud Rate Test Pattern Closed Caption Quick Cooling HDMI Format is only available when the HDMI signal is selected. • CEC When you connect an HDMI CEC-compatible device to your projector with an HDMI cable, turning on the HDMI CEC compatible device automatically turns on the projector, while turning off the projector automatically turns off the HDMI CEC compatible device. Select a baud rate that is identical with your computer's so that you can connect the projector with a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Enable this function to display the grid test pattern, which helps you adjust the image size and focus so as to check if the projected image is free of distortion. • Closed Caption Enable Activate the function by selecting On when the selected input signal carries closed captions*. *About caption An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as "CC" in TV listings). • Caption Version Select a preferred closed captioning mode. To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language in your area). Select On to shorten the projector cooling time from a normal 90-second duration to approximately 15 seconds. 42 Menu Functions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
42
Menu Functions
System Setup : Advanced
menu
Submenu
Functions and Descriptions
Lamp Settings
•
Reset Lamp Timer
Activate this function only after a new lamp is installed. When you select
Reset
,
a "
Reset Successfully
" message displays to notify that the lamp time has been
reset to "0".
•
Lamp Timer
Select to learn the duration (in hours) of lamp usage which is automatically
calculated by the bulit-in timer.
Total (equivalent) lamp hour = 2.0 x (hours used in
Normal
mode) + 1.4 x
(hours used in
Economic
mode) + 1.0 x (hours used in
SmartEco
mode)
HDMI Settings
•
HDMI Format
Select an input source type for the HDMI signal. You can also manually select
the source type. Different source types carry different standards for the
brightness level.
HDMI Format is only available when the HDMI signal is selected.
•
CEC
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, turning on the HDMI CEC compatible device automatically turns
on the projector, while turning off the projector automatically turns off the
HDMI CEC compatible device.
Baud Rate
Select a baud rate that is identical with your computer’s so that you can connect
the projector with a suitable RS-232 cable and update or download the
projector’s firmware. This function is intended for qualified service personnel.
Test Pattern
Enable this function to display the grid test pattern, which helps you adjust the
image size and focus so as to check if the projected image is free of distortion.
Closed Caption
•
Closed Caption Enable
Activate the function by selecting
On
when the selected input signal carries
closed captions*.
*About caption
An on-screen display of the dialogue, narration, and sound effects of TV
programs and videos that are closed captioned (usually marked as "CC" in TV
listings).
•
Caption Version
Select a preferred closed captioning mode. To view captions, select
CC1
,
CC2
,
CC3
, or
CC4
(
CC1
displays captions in the primary language in your area).
Quick Cooling
Select
On
to shorten the projector cooling time from a normal 90-second
duration to approximately 15 seconds.