BenQ W500 User Manual - Page 12

English Remote control 1. POWER 1 Turns the projector on or off. See pages 23, 34 and 47 for details. 2. Source buttons (COMP1, COMP2, VIDEO, HDMI, D-SUB, S-VIDEO) 2 Selects an input source for display. See "Switching input signal" on page 25 for details. 3 3. Aspect buttons (ANA (Anamorphic), 4:3, LB (Letterbox), WIDE, REAL) Selects the display aspect ratio. See "3. Selecting the aspect ratio" on page 29 4 for details. 5 6 4. MODE Selects one of the picture modes (Cinema, Dynamic, Standard, Photo, User 1, User 2, User 3). See "1. Selecting a picture mode" on page 28 for details. 7 8 5. MEMORY (1, 2, and 3) Selects User 1, 2 or 3 picture mode. See "1. Selecting a picture mode" on page 28 for details. 9 10 6. DEFAULT 11 Restores the default settings for current picture mode. See "1. Selecting a picture mode" on page 28 for details. 7. Arrows buttons (eLeft, cUp, fRight, dDown) Moves the current On-Screen Display (OSD) menu selection in the direction of the arrow being pressed. See "Using the menus" on page 36 for details. 8. ENTER 12 Enacts the selected On-Screen Display (OSD) menu item. See "Using the menus" on page 36 for details. 9. MENU Toggles the On-Screen Display (OSD) menu on and off. See "Using the menus" on page 36 for details. 10. EXIT Exits and saves any changes made using the On-Screen Display (OSD) menu. See "Using the menus" on page 36 for details. 11. Picture quality adjustment buttons See "Picture--Basic menu" on page 37 for details. 12. LIGHT Turns on the remote control backlight for about 10 seconds. Pressing any other button while the backlight is on keeps the backlight on for a further 10 seconds. Press the Light button again to turn the backlight off. 12 Introduction