BenQ X2200W User Manual - Page 8
Either, Connect the video cable., Connect the power cable to the monitor.
View all BenQ X2200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2. Connect the video cable. Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems. Connect one end of the DVI-D cable to the monitor DVI-D socket and the other end to the DVI-D port on your computer. (optional) The DVI-D format is used for direct digital connection between source video and digital LCD monitors or projectors. The digital video signals produce a superior quality picture than analog video signals. Connect one end of the HDMI cable to the monitor HDMI socket and the other end to the HDMI port on your HDMI device. (optional) Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor D-Sub socket. Connect the other plug of the D-Sub cable (at the end with the ferrite filter) to the computer video D-Sub socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. 3. Connect the power cable to the monitor. Plug one end of the power cord into the socket labelled 'POWER IN' on the rear of the monitor. Do not connect the other end to a power outlet just yet. Either Or Or 8 Assembling your monitor hardware