BenQ XL2730Z XL 30 Series Monitors User Manual - Page 16
Connect the headset., Using the headphone hook., left side of the monitor
View all BenQ XL2730Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4. Connect the headset. Connect the headphone connector of your headset to the headphone jack found on the left side of the monitor. Connect the audio cable between the PC and the monitor (via the Mic-In jack at the back). And then connect your microphone connector on the headset to the microphone jack at the left side of the monitor. The headphone jacks work only when the audio source is HDMI or DisplayPort. You may connect the headphones to the headphone jack found on the left side of the monitor. 5. Using the headphone hook. Push to release the headphone hook found on the 1 left side of the monitor ( ). And pull out the headphone hook ( ). 2 Leave your headset on the headphone hook if needed. The maximum load capacity of the headphone hook is 400g. 16 How to assemble your monitor hardware