Beretta Px4 Storm Full Size Beretta PX4 Storm Full Size User Manual - Page 36

SLIDE • Clean the slide with a cloth soaked in gun oil paying particular attention to the breech face, the extractor, the slide rails, the locking shoulders and locking recesses. If necessary, use the supplied brush. Dry slide surfaces with a clean cloth. • Lightly oil the slide. RECOIL SPRING AND SPRING GUIDE ASSEMBLY • Lightly oil the recoil spring and the spring guide assembly with gun oil. After extensive use it may be necessary to first clean these parts using the supplied brush and gun oil. FRAME • Clean the frame surfaces with a soft, dry cloth. • Using a cloth lightly soaked in gun oil, clean the areas of the hammer, the ejector, the seat of the central block and the slide rails. If necessary, use the provided brush. • Carefully dry the parts and lightly oil the slide rails on the frame. MAGAZINE • Make sure the magazine is thoroughly clean and that the follower slides easily downward if pressed. • If necessary, using gun oil, lightly oil the internal walls of the magazine box. • Dry the internal walls of the magazine box with a cloth. Do not leave any oil in the magazine. CAUTION: Do not apply excess oil. Accumulation of oil attracts dirt and dust, which can interfere with the functioning and reliability of the firearm. CAUTION: There are numerous Beretta special parts and accessories that allow for the personalization of your pistol. To request this extensive line of parts and accessories, please contact your local Beretta dealer. 78