Bernina 717 Manual - Page 6
Electrical, Connection, Bobbin
View all Bernina 717 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Electrical Connection Model 717 Connecting up. Compare the voltage indicated on the machine plate with that of your main voltage. Connect foot starter to the machine. Foot starter and flex are connected by a special plug. When this plug is attached to the machine there remains only the flex plug to be connected to a power point. By pressing lightly on the foot starter the machine is set in motion. Adjustable motor. It is an advantage with many kinds of sewing to be able to reduce the speed of the machine. Push the switch. Now the machine runs with half the number of revolutions and the speed can easily regulated. Light switch. By pressing switch (7) the dazzle-free light can be switched on and off. Pull out light cover sideways to change the bulb. Press bulb upwards, turn anti-clockwise and draw downwards. To insert bulb, turn it clockwise. Removing the bobbin case Bobbin and Case Model 717 rJ Open stitch plate slide. Turn handwheel towards you, until needle reaches highest point. Open the hinged latch with thumb and forefinger of the left hand and remove the bobbin case. The insertion of the bobbin case is carried out in the same manner.