Bernina 817 Manual - Page 39
Hemmer
View all Bernina 817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
The Hemmer I lemmer 003 Needle: 80-70 Mercerised sewing thread No. 50 Stitch width: 0 Stitch length: 112/ -2 Automatic: straight stitch Needle position: centre Drop feed control: sewing To begin sewing: Fold edge of fabric twice (not too wide). Lay work under the (0) presser foot and sew a few stitches. I The corners: These are sewn in two stages as follows: r I First cut a little off (not too much otherwise they will pull apart) Sew first seam. How to guide the work Leave needle in the fabric and lilt presser foot. Tautly hold the first fold under the presser foot with the left hand and draw II through the spiral on the presser loot. When guiding fabric hold it taut and lift it slightly. The edge of the fabric must be vertical and run through the machine in a straight line. 38 Fold edge of fabric twice and draw a strong thread through by hand.