Bernina Bernette 12 Instruction Manual - Page 46
Beginning the seam, Removing the work ²
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
10 12 15 EN Beginning the seam Place fabric approximately 1cm (1/2") inward from the outer edge under the presser foot. Press the reverse sewing lever (A) while sewing backwards up to the fabric edge. Release reverse sewing lever and continue sewing. End of seam (1) At the end of seam, press down the reverse sewing lever (A). Sew a few reverse stitches. Release the lever and the machine will sew forwards again. Removing the work (2) Turn the handwheel towards to bring the thread take up lever to its highest position, raise the presser foot and remove the work towards the back. Cutting the thread (3) Cut both threads with the thread cutter (B) located on the left rear side of the face plate. 42 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR