Binatone MBP 41S User Guide - Page 10

When charging 1. If the parent unit is turned OFF, when the adapter is plugged in, a mains plug logo will display briefly, followed by a large battery icon with internal segments cycling for 45 seconds. The Blue LED in the top left corner lights up to indicate the adapter is plugged in. 2. If the parent unit is turned ON, when the adapter is plugged in, the battery icon in the screen's top right corner will show that the battery is charging by cycling the internal segments. The Blue LED in the top left corner lights up to indicate the adapter is plugged in. 2.4 Registration (Pairing) The Baby monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedure below: 1. Press the M Menu button of the parent unit and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until C is highlighted, and the del/add/view/scan menu will pop up. 3. Press the + UP button or - DOWN button to select ADD, and press the OK button to confirm. 4. CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or - DOWN button to select the desired CAM and press the OK button to start searching for a camera unit. The green audio level LED will flash rapidly while searching. 5. Press and hold the PAIR button underneath the baby unit until the parent unit finds the camera, beeps and the video from the camera appears. NOTE If a particular Baby Unit was registered previously, registering this current Baby Unit again will overwrite the old registration. 10 Getting Started