Binatone SCOUT BARK 100 User Guide - Page 12
Using the SCOUTBARK100
View all Binatone SCOUT BARK 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3. Using the SCOUTBARK100 3.1 Powering On/Off the Pet Collar Unit Press and hold the POWER KEY on the Pet Collar Unit to power it on or off. When powered on, the Indicator LED lights up in green for 3 seconds to indicate that the unit is starting normal operation and is ready to be placed on your dog. NOTE After powering off the Pet Collar Unit, the smart system retains the last level of static correction that your dog responded to, and use that correction level the next time the Pet Collar Unit is powered on. 3.2 Select Level of Static Correction Your SCOUTBARK100 is a smart bark detection device. If there is a bark from your dog, it delivers static correction to discourage or stop your dog from barking (see ""Free" Bark Duration" on page 13). The Indicator LED flashes quickly in green and red when delivering static correction. 1. Press and hold the STATIC CORRECTION KEY on the Pet Collar Unit for 3 seconds. The static correction level indicator will blink. 2. Press the STATIC CORRECTION KEY again to increase or decrease the level. 3. Press and hold the STATIC CORRECTION KEY for another 3 seconds to confirm the level that you have selected on step 2 above. 4. Press the POWER KEY once to check the current level of correction. The Static Correction Level Indicator on the Pet Collar Unit shows the current level of correction (from 0 to 9). Level 0 Dog's Temperament For Initial Training (delivers beep tone and vibration only) 1 For Initial Training 2 Mild 3 Mild to Average 4 Average 12 Using the SCOUTBARK100