Binatone iDECT Link Plus User Manual - Page 84
Troubleshooting
View all Binatone iDECT Link Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
12 TROUBLESHOOTING ALWAYS check that: You have followed all the steps listed in the user guide to install and set up your telephone. All connectors are securely inserted into their sockets. Mains power for the base unit is switched on at the socket. The handset's batteries are correctly and securely installed and are sufficiently charged. Everyday use "I cannot make or answer calls" If the handset's display is blank, it may have been switched off. O O Press and hold on the Main Eclipse Handset or press on the additional handset to switch it back on. Check that the base unit's mains power adapter is plugged in and power is switched on. The base unit needs mains power for normal operation of the phone - not just for charging the handset batteries. Make sure that you are using the telephone line cable supplied with your phone. Other telephone line cables might not work. Move the handset closer to the base unit. Check the Battery Level symbol on the display. If it is low, put the handset back on the base unit or charging pod to recharge the batteries. Switch off the power at the mains socket, wait for a short while and then switch it back on. This may solve the problem. "I cannot make calls" * If the handset display shows KEYS LOCKED, press and hold to unlock it before you make a call. Only one handset (or the base unit) can be connected to an external line at a time. If the handset display shows , the base is already being used by either the answering machine or another handset. 82