Biostar A785G3 Setup Manual - Page 12
FDD1: Floppy Disk Connector, IDE1: Hard Disk Connector, SATA1~SATA4: Serial ATA Connectors - specs
View all Biostar A785G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. 2 34 1 33 IDE1: Hard Disk Connector The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. 40 39 21 SATA1~SATA4: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 4 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s. SATA4 SATA3 SATA2 SATA1 Pin Assignment 1 Ground 2 TX+ 3 TX4 Ground 5 RX6 RX+ 7 Ground 74 1 10
Motherboard Manual
10
2.4
C
ONNECTORS AND
S
LOTS
FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types.
1
33
2
34
IDE1: Hard Disk Connector
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
2
1
39
40
SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4 channels SATA interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
Pin
Assignment
1
Ground
2
TX+
3
TX-
4
Ground
5
RX-
6
RX+
1
4
7
SATA4
SATA3
SATA2
SATA1
7
Ground